Autojetdp Auto Jet Pump-Self-Priming Deep Well Pump-Autojetdp-370A
All are with CE approved (EMC and LVD)
Regarded as one of the best Submersible pumps for deep well water priming. It consists of two pumps connected in series, one is ejector pump and the other is centrifugal pump. The ejector pump is lowered in a 3 well and connected to the centrifugal pump body by two pipes. For working principle, please refer to the pipe connection below.
Usually, these pumps are used with a set of TANK-AUTO system include the tank, the pressure gauge, the pressure switch, the foot value, etc. The TANK-AUTO system is another most significant merit if this pump, which make the pumps more convenient for using.
These pumps are suitable for pumping clean water and chemical non-aggressive fluid. They are extremely reliable, economical to use in domestic applications. To sure adequate counter-pressure, it is always better to install a foot value with a flitter on the suction end. These pumps should be installed in a covered area, protected against the weather...
1. Liquid temperature up to 60
2. Ambient temper up to 40
3. Total suction lift to 9m
4. Continuous duty
Pump body: Cast Iron
Mechanical seal: Carbon/ceramic/Stainless Steel
Heavy Duty Continuous Work
Motor Housing: Aluminum
Shaft: Carbon Steel/ Stainless steel
Insulation class: B and F
Protection class: IP44 or IP54
Cooling: Externally ventilation
|Model||Single-phase Motor||Ejector Type||N=2850r/min||Inch||PACKAGE DIMENSION&G.W||
|Input max||Output power||Current||Suct.max||Q.max||H.max|